TP-LINK TL-WR340GD Manual de usuario descargar pdf (Pagina 12)

TL-WR340G/TL-WR340GD 54Mbps Wireless Router User Guide

2.2 The Back Panel

Figure 2-2

The following parts are located on the rear panel (View from left to right).

¾ POWER: The Power plug is where you will connect the power adapter.

¾ 1, 2, 3, 4 (LAN): Through these ports, you can connect the Router to your PCs and the other

Ethernet network devices.

¾ WAN: RJ45 WAN port for connecting the router to a cable/DSL Modem, or Ethernet.

¾ RESET: There are two ways to reset the Router's factory defaults. With the router powered

on, use a pin to press and hold the Reset button until the SYS LED becomes quick-flash from

slow-flash (about 5 seconds), and then release the button and wait the router to reboot to its

factory default settings, or restore the default setting from “System Tools - Factory Defaults”

of the Router's Web-based Utility.

¾ Antenna: Used for wireless operation and data transmit.

2.3 System Requirements

¾ Broadband Internet Access Service (DSL/Cable/Ethernet)

¾ One DSL/Cable Modem that has an RJ45 connector (you do not need it if you connect the

router to the Ethernet)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 85 86

Sin comentarios

TP-LINK TL-WR340GD Manual de usuario Pagina 12