TP-LINK TL-WA5110G V1 Guía de usuario descargar pdf (Pagina 52)

from a remote location via the Internet.

There are six submenus under the Security menu (shown in Figure 4-34): Fire

wall, IP Address

Filtering, Domain Filtering, MAC Address Filtering, Remote Management and Advanced

Security. Click any of them, and you will be able to configure the corresponding function. The

detailed explanations for each submenu are provided below.

Figure 4-34 The Security menu

4.10.1 Firewall

Selecting Security > Firewall will allow you to turn on or off the general firewall switch as shown

in Figure 4-35. The default setting for the switch is off. Turning the general firewall switch to off will

disable IP Filtering, Do

main Filtering and MAC Filtering even if their individual settings are

enabled.

Figure 4-35 Firewall Settings

¾ Enable Firewall - Check this box to enable Firewall.

¾ Enable IP Address Filtering - Check this box to enable IP Address Filtering. There are two

default filtering rules for IP Address Filtering: Allow or Deny the packets specified to pass

through the router.

¾ Enable Domain Filtering - Check this box to enable Domain Filtering.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 108 109

Sin comentarios

TP-LINK TL-WA5110G V1 Guía de usuario Pagina 52