TP-LINK TD-W8968 V4 Guía de usuario descargar pdf (Pagina 34)

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide

Figure 4-14

 Remove All: Click Remove All, then all the interface in the table will be deleted.

 Remove: Select the check box in the table above and then click Remove, the corresponding

interface will be deleted in the table.

4.5.2.2 ATM-EoA-IPoE

If your ISP provides an IPoE connection and you need to use an ATM Interface, follow the steps

below to add a WAN service over a selected ATM interface:

1. Add a new ATM interface and select EoA option for DSL Link Type (4.5.1.1 ATM Interface

2. Click the Add button on the screen (as shown Figure 4-7). Select WAN Service Interface over

ATM PVC on the next screen (as shown Figure 4-8).

3. If your ISP provides an IPoE connection, select IPoE option for the WAN service type on the

screen (as shown Figure 4-9), and click Next button to continue.

4. Enter parameters in the following blanks to configure the WAN IP Address and click Next.

Figure 4-15

 Obtain an IP address automatically: Select this option, the modem router will be able to

obtain IP network information dynamically from a DHCP server provided by your ISP.



Note:

1) The response message from a DHCP server typically contains a number of configuration

parameters (DHCP options) for the modem router. The DHCP options include IP network

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 116 117

Sin comentarios

TP-LINK TD-W8968 V4 Guía de usuario Pagina 34