TP-LINK TD-W8968 V4 Guía de usuario descargar pdf (Pagina 72)

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide

Choose “Advanced Setup”“Multicast”, you can configure the IGMP protocol on the screen.

Figure 4-70

Click Apply/Save to save your settings.

4.6 IPTV

Choose “IPTV”, and you will see the screen as shown in Figure 4-71.

Figure 4-71

 Enable IPTV: Check this box to enable IPTV. If this checkbox is selected, please set the

following parameters as shown in the figure below. Make sure the following settings are

correct.

 VPI (0~255): Identifies the virtual path between endpoints in an ATM network. The valid range

is from 0 to 255. Please input the value provided by your ISP.

 VCI (1~65535): Identifies the virtual channel endpoints in an ATM network. The valid range is

from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value

provided by your ISP.

Click the Save/Apply button to save your settings.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 116 117

Sin comentarios

TP-LINK TD-W8968 V4 Guía de usuario Pagina 72