TP-LINK TL-SL5428E V3 Guía de usuario descargar pdf (Pagina 315)

TL-SL5428E JetStream L2 Managed Switch CLI Guide

299

Example

Enable NDP and NTDP function for Fast Ethernet port 5:

TL-SL5428E(config)#interface fastEthernet 1/0/5

TL-SL5428E(config-if)#cluster ndp enable ntdp enable

cluster ip pool

Description

The cluster ip pool command is used to create a new cluster. If no specified

cluster name is set through cluster commander command, the newly created

cluster will enjoy the system default name “tplink-cluster”.

Syntax

cluster ip pool ip mask

Parameter

ip —— The cluster IP address pool.

mask —— The cluster IP address mask.

Command Mode

Global Configuration Mode

Example

Create a cluster and configure its IP address pool as 192.168.10.1 –

192.168.0.254:

TL-SL5428E(config)#cluster ip pool 192.168.10.1 255.255.255.0

cluster commander

Description

The cluster commander command is used to specify the cluster name, and

you can only specify the cluster name when you create the cluster. To delete a

cluster, please use no cluster commander command.

Syntax

cluster commander name

no cluster commander

Parameter

name —— The cluster name, ranging from 1 to 16 characters.

1 2 ... 310 311 312 313 314 315 316 317 318 319 320

Sin comentarios

TP-LINK TL-SL5428E V3 Guía de usuario Pagina 315