TP-LINK TL-WA5110G V2 Guía de instalación

1 Note Note Please use only wired network connections to configure the AP. The power adapter can be directly connected to the A

10 Select Use the following IP address Enter the 192.168.1.100 into the IP address field, 255.255.255.0 into the Subnet mask field Enter the DNS se

11 For Windows Vista / Windows 7 OS Click View status Click Properties Go to Start > Settings > Control Panel, and then you will see thefo

12 Select Use the following IP address Enter the 192.168.1.100 into the IP address field, 255.255.255.0 into the Subnet mask field Enter the DNS se

13 Note 2) Configure your IE browser. Now, try to log on to the Web-based configuration page again after the above settings have been

Technical Support  For more troubleshooting help, go to: www.tp-link.com/support/faq.asp  To download the latest Firmware, Driver, Utility and U

2 Login Note If the LEDs display abnormally, please check to see if all the cable connectors(power adapter and Ethernet cable) a

3 Click OK Click Quick Setup Click Next Operation Mode Setting A dialog box will prompt you for the User name and Password. Enter the de

4 2 A. Configuration for WISP Client (CPE) After choosing the AP Client Router mode on the above page, this page will then display. Th

5 Click Next B. Configuration for Point to Point Connection 1) The AP Setting After successfully logging in, configure the other TL-WA5110G b

6 Click Save at the bottom of this page. C. Configuration for Repeater The AP will begin rebooting automatically after clicking Save. Select

7 Find the BSSID of the remote AP that you want to repeat, and then write it down or copy it. Here we copy the BSSID of ‘TP-LINK’ that is 00-19-E0-94

8 Note T1. How do I restore my Router’s configuration to its factory default settings? T2. What can I do if I forget my password? 1) Res

9 For Windows XP OS Go to Start > Control Panel,you will then see the following page. Click Network and Internet Connections Click Prope