TP-LINK TL-WA5110G V2 Guía de instalación descargar pdf (Pagina 5)

Click Next

B. Configuration for Point to Point Connection

1) The AP Setting

After successfully logging in, configure the other TL-WA5110G by following the steps

below.

2) The Client Setting

Click Finish to exit the Quick Setup

wizard and wait until the AP completes

rebooting automatically. The changes

will take effect after rebooting.

Note

Two TL-WA5110G Access Points are needed for this application.

Note

You should change the default LAN IP address of the Client from

192.168.1.254 to 192.168.1.X (X can be any number from 1 to 253) to avoid

an IP conflict with the former AP. Here we choose 192.168.1.2 as an example.

Click Next

Select AP

Enter a unique name for your

wireless network; however, choose a

name that is easily remembered by

network users. Here we enter

TP-LINK_88346E as the SSID for

exam

Select your region from the

drop-down list

Click Finish

1 2 3 4 5 6 7 8 9 10 ... 13 14

Sin comentarios

TP-LINK TL-WA5110G V2 Guía de instalación Pagina 5