TP-LINK TL-SG5428 Guía de usuario Pagina 213
- Pagina / 239
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
200
Syntax
snmp-server traps snmp [ linkup | linkdown | warmstart | coldstart ]
no snmp-server traps snmp [ linkup | linkdown | warmstart | coldstart ]
Parameter
linkup —— Enable linkup trap. It is sent when port status changes from
linkdown to linkup. By default, it is enabled.
linkdown ——Enable linkdown trap. It is sent when port status changes from
linkup to linkdown. By default, it is enabled.
warmstart —— Enable warmstart trap. It is sent upon SNMP function reboot. By
default, it is enabled.
coldstart —— Enable coldstart trap. It is sent upon switch reboot. By default, it is
enabled.
Command Mode
Global Configuration Mode
Example
Enable SNMP standard linkup trap for the switch:
TL-SG5428(config)# snmp-server traps snmp linkup
snmp-server traps link-status
Description
The snmp-server traps link-status command is used to enable SNMP link
status trap for the specified port. To disable the sending of SNMP link status trap,
please use no snmp-server traps link-status command.
Syntax
snmp-server traps link-status
no snmp-server traps link-status
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Enable SNMP link status trap for port 3:
TL-SG5428(config)# interface gigabitEthernet 1/0/3
TL- SG5428(config-if)# snmp-server traps link-status
- TL-SG5428 1
- TL-SG5412F 1
- COPYRIGHT & TRADEMARKS 2
- CONTENTS 3
- Preface 14
- Chapter 1 Using the CLI 17
- 1.1.2 Logon by Telnet 19
- 1.2 CLI Command Modes 24
- 1.3 Security Levels 26
- 1.4 Conventions 26
- 1.4.3 Parameter Format 27
- Chapter 2 User Interface 28
- Chapter 5 VLAN-VPN Commands 41
- Chapter 8 GVRP Commands 55
- Parameters 81
- Local Log is the log 101
- The log buffer indicates 101
- There 101
- Chapter 17 SSH Commands 106
- Example 109
- Chapter 18 SSL Commands 110
- Command Mode 112
- Description 112
- Parameter 113
- ip-addr filename name 130
- Chapter 22 QoS Commands 148
- Chapter 26 ACL Commands 165
- Chapter 27 MSTP Commands 179
- Chapter 28 IGMP Commands 195
- Chapter 29 SNMP Commands 206
- Chapter 30 LLDP Commands 224
- Chapter 31 Cluster Commands 231
Relacionado con productos y manuales para Software TP-LINK TL-SG5428
Software TP-LINK CPE210 Guía de usuario
(77 paginas)
(77 paginas)
Actron CP7572 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Sprzęt komputerowy Actron CP7572.
Dostarczamy 1 pdf podręczników Actron CP7572 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentarios a estos manuales