TP-LINK TL-SG5428 Guía de usuario descargar pdf (Pagina 66)

Parameter

mac-addr —— The source MAC address. Only the user with this MAC Address

is allowed to login.

Command Mode

Global Configuration Mode

Example

Configure that only the user whose MAC address is 00:00:13:0A:00:01 is

allowed to login:

TL-SG5428(config)# user access-control mac-based 00:00:13:0A:00:01

user access-control port-based

Description

The user access-control port-based command is used to limit the ports for

Only the users connected to these ports you set here are allowed to login.

To cancel the user access limit, please use no user access-control command.

Syntax

user access-control port-based interface { gigabitEthernet port | range

gigabitEthernet port-list }

no user access-control

Parameter

port —— The Ethernet port number.

port-list ——The list group of Ethernet ports, in the format of 1/0/1-4. You can

appoint 5 ports at most.

Command Mode

Global Configuration Mode

Example

Configure that only the users connected to ports 2-6 are allowed to login:

TL-SG5428(config)# user access-control port-based interface range

gigabitEthernet 1/0/2-6

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 238 239

Sin comentarios

TP-LINK TL-SG5428 Guía de usuario Pagina 66