TP-LINK TL-WA801ND V2 Guía de usuario descargar pdf (Pagina 12)

TL-WA801ND

300Mbps Wireless N Access Point User Guide

1.4.2 The Rear Panel

Figure 1-2

Viewed from left to right, the following parts are located on the rear panel of TL-WA801ND.

ON/OFF: The switch for the power.

POWER: The power port connects to the power adapter provided with the TL-WA801ND

300Mbps Wireless N Access Point.

Ethernet: One LAN 10/100Mbps RJ45 port connects to a network device, such as a switch or a

router.

WPS: If you have client devices, such as wireless adapters, that support Wi-Fi Protected Setup,

then you can press this button to quickly establish a connection between the device and client

devices and automatically configure wireless security for your wireless network.

RESET: The Reset button is used to restore the AP’s factory default settings. There are two ways

to reset the Access Point’s factory defaults:

 Method one: With the AP powered on, use a pin to press and hold the Reset button (about 5

seconds) until the System LED becomes quick-flash from slow-flash. And then release the

button and wait the AP to reboot to its factory default settings.

 Method two: Restore the default settings from “System Tools > Factory Defaults” of the

AP's Web-based management page.

Wireless antenna: The external antenna is used to transmit and receive wireless data.



Note:

Ensure the AP is powered on before it restarts completely.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 81 82

Sin comentarios

TP-LINK TL-WA801ND V2 Guía de usuario Pagina 12