TP-LINK TL-WA801ND V2 Guía de usuario descargar pdf (Pagina 14)

TL-WA801ND

300Mbps Wireless N Access Point User Guide

Figure 2-1 The Example of Infrastructure Network Incorporating the TL-WA801ND

To establish a typical connection of the AP, please take the following steps:

1. Connect the Cable or DSL modem to a Router.

2. Locate an optimum location for the AP. The best place is usually near the center of the area in

which your PC(s) will wirelessly connect.

3. Adjust the direction of the antenna. Normally, upright is a good direction.

4. Connect the Ethernet Broadband Router to the TL-WA801ND Access Point. Power on the AP.

5. Then you can connect a desktop PC or laptop to your network. (Make sure your computer or

laptop is equipped with a Wireless Adapter.)



Note:

If you are not so clear about how to connect your devices to the network, please refer to Appendix

A Application Example.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 81 82

Sin comentarios

TP-LINK TL-WA801ND V2 Guía de usuario Pagina 14