TP-LINK 54Mbps High Power Wireless Access Point Especificaciones descargar pdf (Pagina 55)

Figure 4-43 Advanced Security settings

¾ Packets Statistic interval (5 ~ 60) - The default value is 10. Select a value between 5 and

60 seconds from the pull-down list. The Packets Statistic interval value indicates the time

section of the packets statistic. The result of the statistic used for analysis by SYN Flood,

UDP Flood and ICMP-Flood.

¾ DoS protection - Enable or Disable the DoS protection function. Only when it is enabled,

will the flood filters be effective.

¾ Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack

Filtering.

¾ ICMP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value

between 5 ~ 3600 packets. When the current ICMP-FLOOD Packets number is beyond the

set value, the router will start up the blocking function immediately.

¾ Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.

¾ UDP-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value

between 5 ~ 3600 packets. When the current UPD-FLOOD Packets numbers is beyond the

set value, the router will start up the blocking function immediately.

¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN- FLOOD

Attack Filtering.

¾ TCP-SYN-FLOOD Packets threshold: (5 ~ 3600) - The default value is 50. Enter a value

between 5 ~ 3600 packets. When the current TCP-SYN-FLOOD Packets numbers is

beyond the set value, the router will start up the blocking function immediately.

¾ Ignore Ping Packet from WAN Port - Enable or Disable ignore ping packet from WAN port.

The default is disabled. If enabled, the ping packet from the Internet cannot access the

router.

¾ Forbid Ping Packet from LAN Port - Enable or Disable forbidding Ping Packet to access

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 103 104

Sin comentarios

TP-LINK 54Mbps High Power Wireless Access Point Especificaciones Pagina 55