TP-LINK CPE510 Guía de usuario descargar pdf (Pagina 37)

Chapter 4 Status Tab

 ARP table

Lists all the entries of the Address Resolution Protocol (ARP) table currently recorded on the device. ARP is

used to associate each IP address to the unique hardware MAC address of each device on the network.

IP Address

Displays the IP address assigned to a network device.

MAC

Displays the MAC address of the device.

Interface

Displays the interface that connects to the device.

Auto Refresh If Auto Refresh is checked, parameters in the table will refresh automatically.

 Routes

List all the entries in the system routing table. PharOS examines the destination IP address of each data

packet traveling through the system and chooses the appropriate interface to forward the packet to.

Routing depends on static routing rules, which are registered in the system routing table. Static routes to

specific hosts, networks, or the default gateway are set up automatically according to the IP configuration

of all the Interfaces.

Destination

Displays the IP address of the destination device or destination network.

Gateway

Displays the IP address of the appropriate gateway.

Subnet Mask

Displays the Subnet Mask of the destination device.

Interface

Displays the interface that the destination device is on.

Auto Refresh If Auto Refresh is checked, parameters in the table will refresh automatically.

 DHCP Clients

DHCP Clients display the current information of the clients including client names, MAC addresses, IP

addresses assigned by the device’s DHCP server and their lease time.

- 34 -

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 94 95

Sin comentarios

TP-LINK CPE510 Guía de usuario Pagina 37